reciprocating motion
英 [rɪˈsɪprəkeɪtɪŋ ˈməʊʃn]
美 [rɪˈsɪprəkeɪtɪŋ ˈmoʊʃn]
网络 往复运动
双语例句
- Apply to reciprocating motion of hydraulic cylinder piston rod sealed device can also be used to cover the static flange seal.
适用于液压缸活塞杆往复运动用密封装置，也可用于法兰端盖的静密封装置。 - In addition, the piston is generally with the connecting rod connected by a powerful, powerful fixed in the fuselage along the board for reciprocating motion.
另外，活塞一般是靠十字头与连杆连接的，十字头沿着固定于机身上的滑板作往复运动。 - Cam: A device for converting circular or rotary motion into reciprocating motion. The Idea of Reciprocating new Human Power Generating Device
凸轮：把旋转动力转为往复力的机件。往复式新型人力、畜力发电装置的设想 - Make the electromagnet attached and fixed to the sheet iron through magnetizing to produce the friction force in the reciprocating motion.
充磁，使电磁铁吸附在铁板上，产生之后往复运动时的摩擦力。 - The crankshaft, regarded as the "backbone" of the engine, serves to change the reciprocating motion of the piston into rotary motion and handles the entire power output.
曲轴，也叫做发动机的“脊柱”，其作用是将活塞的上下往复运动转换成为旋转运动，并且控制着整个的功率输出。 - A wheel gear ( the pinion) meshes with a toothed rack; converts rotary to reciprocating motion ( and vice versa).
啮合在齿轮架上的齿轮；把旋转变成往复运动。 - Electrolytic micromachining system based on cathode cyclic reciprocating motion
基于阴极周期往复运动的微细电解加工系统 - Piston pump mainly by the piston in the pump cylinder for reciprocating motion to breathe and remove the liquid.
活塞泵主要由活塞在泵缸内作往复运动来吸入和排除液体。 - The crankshaft, in conjunction with the connecting rod, converts the reciprocating motion of the piston to the rotary motion needed to drive the vehicle. spherical union swivel
曲轴，和连杆一起，把活塞的往复运动转化为驾驶车辆需要的旋转运动。球面活管接旋转接头 - The device can also be used in the occasions of rough sealing of other high-temperature atmospheric-pressure reciprocating motion rod parts.
本装置也可用于其它高温常压往复运动杆件粗密封的场合。 - It cannot allow the link to translate on the horizontal direction, thus enabling the link to do reciprocating motion.
不能让杆子的中心点左右移动，才能做往复运动。 - Automatic restart-work, gas supercharger quickly, with reciprocating work output pressure close to set pressure value when pump reciprocating motion velocity slows until stop.
自动重启&工作时，气体增压器迅速往复工作，随着输出压力接近设定压力值时泵的往复运动速度减慢直至停止。 - Diverter becomes steering wheel's rotation steering arm's swinging or the rack axis straight reciprocating motion, and to changes the control force to carry on the enlargement the organization.
转向机的作用是通过方向盘的旋转，改变转向臂的位置或者齿条轴向循环直线的位移，以达到扩大系统控制力的目的。 - The magnetic mechanism and the driving device composed of the overlapped permanent magnet not only can be used for transferring the linear reciprocating motion but also the rotary motion.
用这种重叠式永久磁铁所构成的磁力机构和传动装置，既可以用来传递直线往复运动，也可以用来传递旋转运动。 - A set of fixture is added to the lathe to change the rotary motion of the lathe to linear reciprocating motion.
在车床上增加一套夹具装置，可将车床的回转运动改为直线往复运动。 - The Stability Analysis of the Reciprocating Motion System Using Two Way Valves
二通阀往复运动系统稳定分析 - Automatic Measurement and Control System of Dynamic Tire Laboratory Bench Reciprocating motion Displacement
轮胎动态实验台往复运动位移自动测控系统 - The thesis researches position control of reciprocating motion of honing machine spindle, which is one of important parts for honing machine technology upgrade.
本课题主要对珩磨机主轴往复运动位置控制系统进行研究，这是珩磨机整机技术改造的重要组成部分之一。 - A new type of oscillatory flow reactor has been developed by adding a ring baffle in tube reactor and making a piston reciprocating motion at its bottom.
在管式反应器中加环状挡板，在底部增加一个活塞式往复运动，构成一种新型振荡流反应器，此反应器和传统搅拌反应器相比有很多优点。 - The reciprocating motion of differential cylinder servo system is asymmetrical.
差动缸液压伺服系统往复运动是非对称的。 - The linear motor pumping units of most peculiarity uses frequency conversion and control, directly changing electric energy into straight reciprocating motion.
这种抽油机最大特点是改变了过去各种抽油机将电能转变为旋转运动，再通过机械方式转变为直线往复运动的方式，通过变频和控制直接将电能转变为直线往复运动。 - A mobile-axis and the rotation axis are driven by the stepper motor, Another moving axis driven by a hydraulic cylinder does linear reciprocating motion.
其中一移动轴和转动轴由步进电机驱动，另一移动轴由液压油缸驱动做直线往复运动。 - Crankshaft is one of the five core components in the engine, translating reciprocating motion of the connecting rod into rotation motion, it is the core of the motor drive mechanism.
曲轴是发动机中五大核心零部件之一，将连杆的上下往复运动转换为旋转运动，是发动机的核心传动机构。 - Based on the established linear motors platform, reciprocating motion characteristics under no-load and load conditions are measured.
在建立的直线电机对拖平台上测量了样机的空载与负载往复运动特性，证明了样机具有较好的伺服性能。 - Under the working conditions, crankshaft bears complicated alternating load, such as constantly changing periodic gas force, reciprocating motion weight inertia force, rotational and centrifugal inertia force, tensile, compression, bending load etc, generates torsion and transverse and vertical vibration therefore.
在工作过程中受到周期性不断变化的气体力、往复运动质量惯性力、旋转与动离心惯性力和拉、压、弯曲等复杂交变载荷，产生扭转和横向、纵向振动。 - As one of the most stringent components in diesel engine, piston transfers the driving force during its high-speed reciprocating motion and withstands high mechanical load and thermal load.
活塞是柴油机工作条件最苛刻的部件之一，它在高速往复运动中传递着整个柴油机的原动力，承受着极高的机械负荷和热负荷。 - Axial piston pump is through the reciprocating motion of the piston to achieve oil suction and extrusion.
轴向柱塞泵是通过斜盘推动柱塞往复运动来实现泵的吸排油过程和系统压力的建立。 - Sucker rod is a power transmission component in rod pumping oil system, driving pump plunger up and down for reciprocating motion in oil Wells work, which carries alternating load.
抽油杆是有杆抽油系统中传递动力的部件，在油井工作中带动泵柱塞作上下往复运动，承受交变载荷。 - It uses the straight reciprocating motion of the linear motor directly to drive the movement of pumping rod and achieve the goal of lifting the liquid of oil wells.
潜油式直线电机抽油机改变了传统抽油机的运动机理，直接利用直线电机的直线往复运动带动抽油杆上下运动，从而达到举升油井内液体的目的。